A sliding couch cushion can be one of the most annoying problems. While you are trying to relax on your sofa, you continuously have to reposition your cushion to its original place. This takes away from your relaxation. So how can you fix this problem? While you might think this is a pain everyone just has to live with, there are ways to keep it from ever happening again. We’ve done the research and compiled a list of solutions for you to try at home.
To stop a couch cushion from sliding, you can try one or more of these options:
- Velcro strips underneath the cushion
- A rubber drawer liner underneath the cushion
- Hooks and rings on the back of the cushion connected to the couch
Keep reading below as we discuss each of these solutions further and answer other common couch questions.
Velcro Strips Underneath The Cushion
This is one of the easiest ways to solve your cushion-sliding problem. It involves placing one side of the velcro on the bottom of your cushion using the sticky side to attach it. The next step is to place the other side of the velcro on the couch where it can meet up with the other half.
This allows the velcro to keep the cushion in place, but also for it to be easily removable if you need to lift the cushion.
How Do I Properly Install Velcro Strips?
You have plenty of options when it comes to where to install the velcro. The velcro strips should be about 10-15cm. You can place the strips either underneath the cushion, where there will be more room for more strips or on the back of the cushion. You can even do both.
Click here to find VELCRO brand strips on Amazon.
Non-Slipping Rubber Drawer Liner
While this may seem obscure, rubber drawer liners are fantastic for helping keep your cushions in place. You can purchase these mats at any home improvement store, Walmart, or on the internet. They are sold almost anywhere.
Compared to velcro strips, rubber drawer liner is easily removable and won’t leave any residue or marks like the sticky side of velcro might.
How Do I Properly Install Rubber Drawer Liner?
For the best results, take the rubber drawer liner and cut it to the size of your couch cushion and simply place it underneath between the couch and the cushion. This non-slip surface will hold every inch of the cushion in place if properly cut to size.
Click here to find Gorilla Grip Drawer and Shelf Liner on Amazon.
Hooks And Rings
Using clips and rings requires a little bit of DIY skills. This method can be the most convenient since it becomes a permanent part of your couch. You can hook the cushion to the couch and keep it from sliding forward.
How Do I Properly Install Hooks And Rings?
For this method, take a small piece of fabric and sow it to the couch and cushion. Make sure they are facing each other. Then take a ring and sew it on the fabric with the cushion. Lastly, take a hook and show it on the piece of fabric on the couch.
Make sure you purchase a plastic, blunt hook. You do not want to buy anything sharp since it will be sewn to your couch.
How Do You Fix A Sagging Couch Cushion?
A sagging couch cushion often feels like a divot in your favorite spot. There are a couple of ways you can fix a sagging couch cushion.
One of the most popular ways is by adding more foam to your cushion. Do this by finding the zipper that is usually located on the back of the cushion and unzipping it. You will then have access to the insides of the cushion. From here, you will be able to access all the foam and even add more where it needs it. You can use foam wrapped in polyester batting to recreate the feel of couch foam, as this is the best thing to use on cushions. The best type of foam to use is generally polyurethane foam.
Once you’ve filled up your cushion to feel exactly how you want it to feel, all you have to do is zip it back up.
Even though adding foam may help, it is not always the root cause of your problem. If your seat cushions seem to be sagging, you should remove them and see if there are any structural issues in your couch. For example, you may have had a board break under your cushion, which would cause it to sink towards the floor.
If this is the case, you may be able to repair it with some simple wood glue or a few nails. Just make sure there is no way for any nails to poke through.
The last way to fix a sagging couch cushion is by simply re-fluffing all the foam inside the cushion. This is the most affordable option as it does not cost any money and only requires a few minutes of work. You can do this by unzipping the cushion and pulling out all the foam. Then examine each piece and stretch it out as needed. Finally, put the foam back and arrange it to be evenly spread around.
How Do You Get A Couch Cover To Stay In Place?
The easiest way to make sure a couch cushion stays in place is by tucking it into every crease on the couch. On top of that, most couch covers have drawstrings at the bottom, which allow you to tighten up the cover even more after you have tucked it in every crevice.
For an extra layer of security, try wrapping up old newspapers and stuffing them in between and behind the cushions to create a tighter seal.
Summary
All in all, couch cushion repairs are relatively simple and can be done with either leather or cloth cushions for just a few dollars and about an hour of your time. It doesn’t hurt to try to utilize more than one of these methods at once so that you can make sure your couch cushion is extra stable. Next time you have guests over, they’ll be amazed at how comfortable they are on your perfectly-situated couch cushions.