How To Remove Metal Scratches From Toilet Bowl

There’s nothing worse than having to use a toilet and discover that it has scratches all over it. Whether the scratches are just cosmetic or if they’re a real safety hazard, you must know how to remove them.We have researched and tested the best methods for removing toilet bowl scratches so you can enjoy a clean, safe toilet again.

Here are the steps to remove metal scratches from toilet bowls:

1. Turn off the valve

2. Flush the toilet

3. Scoop the remaining water out of the bowl 

4. Sprinkle an oxalic acid-based scouring powder (read on to find out the most effective scouring powder for this job!). 

5. Scrub the scratch marks using a scrubbing pad until they’re gone

Metal scratches on toilet bowls are usually caused by a plumbing auger or cleaning brushes with steel bristles. The good news is that these metal scratches don’t require any special tools to remove. It’s just a matter of applying a small amount of scouring powder to the affected area until it looks repolished. Read on to learn the correct way of removing toilet bowl scratches.

 

5 Steps To Remove Metal Scratches From Toilet Bowls

Whether it’s from a family member who thought it was okay to use a steel brush to clean a toilet bowl or from your little one who thought playing with the steel brush on the toilet bowl was fun, toilet bowl scratches are not a pretty sight.

Luckily, there are ways to remove toilet bowl scratches without having to pay for a professional service. We have a simple solution to help you fix those deep scratches and get your toilet back to its original state.

Here are the steps:

1. Turn off the valve

You need to stop the water from refilling and flowing into the toilet bowl. This will make it easier for you to scoop out the water.

2. Flush the toilet

toilet bowl flushing water, up close photo, white toilet bowl

Flush the toilet to ensure that no dirt or debris remains in the toilet bowl. You don’t want any of these in your hands even if you’ll be wearing latex gloves.

3. Scoop the remaining water out

Scoop the remaining water out until it’s down below the level of the scratch marks. You’ll be sprinkling some scouring powder on the scratches and you don’t want water to wash the powder away.

4. Sprinkle an oxalic acid-based scouring powder

Oxalic acid is a naturally occurring compound found in many plants, especially spinach, cabbage, broccoli, and parsley. When applied to surfaces, it helps break down grease buildup. It also removes rust and toilet stains.

The most highly recommended oxalic acid-based scouring powder for repolishing scratched toilet bowls is Bar Keeper’s Friend.

Sprinkle Bar Keeper’s Friend directly into the scratched surface. Mix a small amount of water into it. Let it sit for a few minutes for optimal results.

5. Scrub the scratch marks

Using a scrubbing pad, scrub the scuff marks until they are smooth. You’ll gradually see the scratches disappear. It may take time depending on the depth or severity of the scratches.

Watch the video below to see Bar Keeper’s Friend live in action.

Click here to see this powdered cleanser on Amazon

Bar Keeper’s Friends Looks Organic. Is It Non-Toxic?

Oxalic acid is a chemical compound that occurs naturally in the human body (as a waste product), and it is also found in many green-leafy plants and vegetables. Oxalic acid is toxic, and it should be handled carefully.

In addition, this acid can cause blistering and peeling of the skin, so wearing gloves is recommended when handling this Bar Keeper’s Friend. Due to its caustic nature, it also has the ability to damage the eyes and mucous membranes when accidentally inhaled.

Can You Use Baking Soda On Scratched Porcelain?

white toilet bowl, dark grey wall, light grey wall, tissue rolls, white floor tiles

Scratches can be tough to remove. Especially if they are deep and dirty, like in sinks, toilets, and tubs. A lot of people have trouble getting all the dirt and grime out of the scratches.

However, if your toilet has minor scratches, you can use baking soda. Baking soda is a common household cleaner that also makes an excellent scratch repair product. Not only can you use it to clean your toilet, but it can also help you get a smooth finish on it!

Can You Use Toothpaste To Hide Scratches On Porcelain?

Steel toilet brushes and other cleaning materials that have a tendency to leave minor scratches on the toilet bowl, such as steel wools, can easily be hidden using a little bit of toothpaste.

The best toothpaste for this is the one that has a thick consistency, and it should be white. Simply dip a finger into the toothpaste, rub it over the scratch and then wipe it away with a damp cloth. Don’t forget your latex gloves!

Is It Safe To Use Pumice Stone To Clean Toilet?

Pumice stones are an excellent tool for cleaning toilets and removing stubborn dirt and gunk from a variety of surfaces. The abrasive quality of pumice stones helps to quickly polish any surface.

They are the popular choice for homeowners who prefer a natural approach to cleaning. However, if you have a toilet that is made of porcelain, you should be mindful of the fact that dry pumice will erode the toilet glazing and scratch it.

For the best results, always keep the pumice stones damp and apply the pumice stones with a steady hand on the toilet surface with gentle and consistent pressure.

shutterstock.com/image-photo/rectangle-shaped-foot-calluses-removal-natural-481365052

What Paint To Use To Repair Scratched Toilet Bowl?

If you’re looking for a cost-effective and easy way to restore the look and feel of your old toilet, you should consider adding epoxy paint to the mix.

Further, a new coat of epoxy paint provides a high gloss finish, which can help to increase the appeal of your toilet. In addition, it also acts as a sealant that seals minor cracks and scratches in the porcelain and prevents water from seeping through.

Can You Resurface A Toilet Bowl By Recoating It?

very clean photo of a toilet, white toilet bowl, trash bin, bidet, toilet sink

Yes, you can. The first step to restoring an old toilet is to clean and prep the surface. The toilet should be cleaned thoroughly with a soap-based solution using a coarse sponge. Next, rinse the soap and wipe the entire toilet down with rags or towels and let it air dry.

The next thing to do is to remove the old finish. Otherwise, the new paint won’t adhere well to the toilet surface because of the old finish.

You’ll notice the old finish to be extremely hard or stubborn. The best way to remove a hardened finish is to sand it until it’s rough enough for the new paint to adhere to.

The third step is to cover the surfaces of the toilet that you don’t want to be repainted. Professional painter’s tape is commonly used to prevent paint from getting on surfaces you do not want to be painted. It is very easy to use and can be purchased in rolls, sticks, and single sheets.

The fourth step is to spray the primer on the toilet and allow it to dry for four hours. You can use a paintbrush, but you run the risk of applying the coating unevenly unless you do it correctly. For the evenest coating regardless of experience level, you should use a spray can.

Lastly, paint the toilet surface with a coat of epoxy spray paint. Spray the coating in an even layer. It is recommended that you maintain a distance of 8 inches between the spray can and the toilet surface you’re spraying. Wait for at least 8 hours before you can use the toilet again.

Check out this professional painter’s tape on Amazon

Brown Ring Stains In Toilet Bowls – What Is Causing Them?

The brown ring stains are caused by a buildup of minerals. This is usually due to high levels of iron or another mineral in the water. These minerals cause stains, so even if you’re scrubbing everything to remove the stains, they’re likely to reappear.

You may use a water testing kit to check the water quality. These kits are available at hardware stores and home improvement centers, or you can find them online.

A water testing kit is a good addition to any homeowner’s arsenal of household solutions. It allows homeowners to test the quality of water from their water supply system.

These kits contain strips of various chemicals that react to different levels of contaminants to produce a color change. When the strips are immersed in water, a color change indicates the presence of contaminants.

There are many ways to test your water’s quality. Some kits include the chemicals to test for hardness, pH, and chlorine, but others may be limited to testing for general pollutants such as lead, nitrates, and arsenic.

Be sure to read the instructions on the packaging to ensure that you use the correct chemical to test for the contaminant you are trying to detect.

Check out this water testing kit on Amazon

Pink Ring Stains In Toilet Bowls – What Is Causing Them?

Pink ring stains are caused by the bacteria Serratia Marcescens. This bacteria will quickly colonize the area around the toilet and spread to other parts of the bathroom if you don’t remove it promptly.

This is a problem that needs to be fixed immediately to prevent infection. This problem is very common, but most of the time it is not serious to those who are not immuno-compromised.

In Closing

clean toilet, white toilet bowl, white floor tiles, white walls

For a scrupulous eye, even a single toilet bowl scratch is enough to ruin the whole day. But thanks to the use of the right type of scouring powder, you don’t have to worry about scratching your toilet bowls anymore.

This doesn’t give you, however, the green light to mishandle your toilets. Instead, it should remind you to maintain your toilet and make sure that it’s in tip-top shape each and every time.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top